previously I looked at the new machine with Blender benchmarks.
This time I want to note some of the death notes from the old machine.
I am 90 percent sure the issues were caused by power spikes. I occasionally noticed lights flickering when the house was starting the central heating. I have replaced all the power strips with surge protected versions.
I had noticed the root drive go into readonly mode, rebooted and it would not even boot.
On the new machine could not mount the drive so ran
fsck
and had to say Yes to a huge number of fixes :(
reboot
But... I can now mount the drive...
... the only folder is lost+found
and there are 234 files and folders and they are just numbers prefixed with a #
and the folders in those folders are more numbers!
but ... deep inside that there are file names!
I have a back up of most of the data so my job is to find where the files I care about are.
as root collect all the files and their paths
find . -type f > /tmp/lost_and_found.files
grep Documents /tmp/lost_and_found.files
and it lists all the files in my Documents folder and crucially shows the name of the folder that it is hidden in!
ls -lhart ./\#1048577/USER/Documents/
then shows me the files in date order, phew!
Eventually I have recovered ALL the files I care about.
The 2TB drive has a manufacture date of Nov 2025, nothing on Smart utils about bad health.
I built me new machine back in 2023, that machine is now mine!
I am going to create another post for some of the problems and environment set up.
This post is showing off the POWER!
Previously the Blender (benchmark)[Dec2019.html#p081220191806] were based purely on times to render in Windows and Linux.
This time it is score based
12th Gen Intel Core i7-12700KF
monster: 142.330705 samples per minute
junkshop: 110.708117 samples per minute
classroom: 78.016276 samples per minute
NVIDIA GeForce RTX 4060 Ti
monster: 1716.241434 samples per minute
junkshop: 1237.383737 samples per minute
classroom: 1046.135699 samples per minute
The old machine specs were
i5-9400f 2.90GHz with 6 cores running at 3.98GHz, 16GB ram and a NVIDIA GeForce GTX 1660Ti (6GB, 1536 cores)
British Gas replaced my meter and gave me a gizmo to track power usage.
TLDR I itterated over designs and the mounted the unit under my kitched cabinet.
Before
After
Not perfect, but it is not falling out so I call that a win!
I measured the frame and created curve in Blender with a modifier to give it thickness. First attemp fitted! Nice.
First attempt was a bit off, second attempt nailed the angle, but had a little bit of messy print.
No problem, on to the next step.
This will stop the unit tipping forward...
Hmmm, where is the flange?
answer, stick to the build plate!!
After a number of spagetti prints I get the all the bits...
but for some reason it is incrediably brittle and nearly everything snaps off!!
I print again and it works perfectly and works.
The current culprit looks like power spikes, the same dastardly spikes that killed my old machine!
(I now have everything plugged into surge protected sockets)
This appears to have been caused by power spikes from my central heating, but the hard drive after a fsck was just numbers.
This post is just to check if all the bits of sellotape are in the right place to run all my ancient Flog scripts.


email
root
flog archives
Disclaimer:
This page is by me for me, if you are not me then please be aware of the following
I am not responsible for anything that works or does not work including files and pages made available at www.jumpstation.co.uk
I am also not responsible for any information(or what you or others do with it) available at www.jumpstation.co.uk
In fact I'm not responsible for anything ever, so there!